Bergo Tennis

BERGO TENNIS is part of the System 1-floors and is a sound, technical product.

Bergo Tennis is a well-established flooring product, approved and classified by the ITF and the Swedish Tennis Association. This floor has been classified as "fast" and the unique structure ensures correct resistance, bounce and friction.
Bergo Tennis can be installed very rapidly, and in just a few hours you have a brand new tennis court!
Its multifunctional properties ensure rapid draining of rainwater, and it has been developed to withstand tough conditions in all climates and has been tried and tested on sports and tennis courts throughout the world.
This flooring is equally suitable indoors and out, in all possible climates and weather conditions. Comfortable to walk on, even in bare feet in the hottest of countries.

Bergo Tennis

StandardColors

Green

Dark Blue

Tennisred

AnyDesign - AnyColor

We have, in collaboration with the designers developed a wide and attractive range of colors that can be combined endlessly.
We call it AnyColor.

When ordering colors that does not appear in standard colors above, an additional fee for orders less than 300m2 will be charged. Minimum order 10m2.

 

True White

Shadow Grey

Stone Grey

Metal Grey

Graphite Grey

Silk Black

Sandstorm

Sand

Cedar Wood

Terracotta

Sienna

Chocolate Brown

Spring Grass

Pine

White Cloud

Morning Blue

Steel Blue

Blue Heaven

Yellow Flame

Orange Glow

Hot Red

Blue Violet

Warm Violet

Purple

Light Blue

Red

Video

Go to our Youtube-channel

Product Information

Here are some of the multifunctional properties offered by the product:

  • Can withstand all types of climates and environments
  • For indoors and outdoors.
  • Easy to install/move.
  • Requires minimal maintenance
  • Ergonomic – good for joints and backs
  • Correct bounce across the whole court
  • Extremely durable
  • Excellent drainage capability
  • Allows the surface beneath to breathe
  • All-weather court – dries quickly after rain.
  • Soundproofing properties
  • Ideal on worn asphalt, old clay courts or cracked concrete

The minimal maintenance requirements of these floors are valued by municipalities, hotels, companies and leisure centres throughout the world. Supplied as pre-assembled sheets (3 x 4 tiles), which means the floors can be laid very quickly. We offer complete systems including court markings, etc. Contact us for more details.
Our floors are 100% recyclable as a raw material, again and again, and can ultimately be incinerated at district heating plants for heating our homes, with no environmentally-harmful emissions.

NEW! BERGO ECO TENNIS - A TENNIS FLOOR MANUFACTURED FROM 100% RECYCLED MATERIAL. READ MORE HERE.

 

Quotes

“We have found the BERGO surface to be wholly satisfactory, and we wish to continue using it in the future for further modernisation and expansion of the complex.”

/ Jiří Knížek, Ma. owner of tennis club, TK LOB, Praha-Bohnice

Read more

Accessories

Edge Strip, System 1

By using Bergo Edge strips and corner strips you will give your floor an attractive design.

Available in all AnyColor colors.

Please note! Edge strips are not possible to attatch to cutted floor tiles.

Technical specification

Art. No. 520__

kantlistSystem1Image.jpeg kantlistSystem1.jpeg

Bergo Corner strip, System 1

By using Bergo Corner strips, together with Edge strips, will give your floor an attractive design.

Available in all AnyColor colors.

Technical specification

Art. nr. 430__

hornlistSystem1Image.jpg hornlistSystem1.jpg

Connecting-rings Edge Strip, System 1

Bergo Connecting-rings are only being used in certain cases and only with Bergo Edge strip together with the following tiles: Bergo Checker, Excellence, Multisport, Premium, Royal and Tennis.

Bergo Connecting-rings are being used as Edge strips are to be connected/installed on the two sides of the tile where the pro-truding rings are missing.

NOTE!
Connecting-rings are not needed for connecting/installing the Edge strip with Bergo Elite, XL and Unique!

Technical specification

Art. No. 8BK

fastoglaImage.jpg fastogla.jpg

Edge protection

Self-gripping Edge Protection profile for cutted edges.

Technical specification

PVC with integrated steel strip core.

Colour: Black.

 

System 1

15 x17 mm

Art. No. 23BK per meter, Art. No. 24BK for one roll. 

 

System 2

15 x 12 mm

Art. No. 76BK per meter. Art. No. 77BK för one roll.  

DSC_0002.jpeg DSC_0010.jpeg

Expansion Strip, System 1

Bergo expansion strips should be used when the area is exposed to dramatic temperature changes.

In cases where some of the sides are longer than 6 metres, an expansion strip may be required. This is the case with outdoor surfaces or indoor surfaces where large areas of glass let a lot of light onto the floor. If there are large temperature differences, there is a risk that the floor will become warped. You can prevent this by inserting expansion strips. You will find more detailed information in the Laying Instructions. If you are in doubt, you are more than welcome to contact our customer services. Then we will tell you more!

Expansion strips are only for System1 floors. 

Please notice that our System 2 tiles has been developed with an expansion space in between each tile in order to avoid expansion during temperature variations. One are therefore in no need of expansiontiles for this type of tile.

Available in all AnyColor colors.

 

 

Technical specification

Material: Environmentally friendly recyclable UV-stabilized PP-composite. UV- and Colorstabilised for climat in Arizona. FDA approved. No emissions. (No PVC).

Art. No.: 240__

Size: 300 x 75 x 13,5 mm.

Weight 1 pcs: 98 g.

Weight 2-pack: 210 g.

expListImage.jpg expList.jpg

Expansion Cross-piece, System1

Bergo expansion strips should be used for SYSTEM 1 when the area is exposed to dramatic temperature changes.

Expansioni Cross-piece are used as two lines of the Expansion Strips intersect with each other.

In cases where some of the sides are longer than 6 metres, an expansion strip may be required. This is the case with outdoor surfaces or indoor surfaces where large areas of glass let a lot of light onto the floor. If there are large temperature differences, there is a risk that the floor will become warped. You can prevent this by inserting expansion strips. You will find more detailed information in the Laying Instructions. If you are in doubt, you are more than welcome to contact our customer services. Then we will tell you more!


Bergo Unique, Bergo XL, Bergo Elite, Bergo Nova, Bergo Briq belongs to System 2 and has been developed with an expansion space in between each tile in order to avoid expansion during temperature variations. One are therefore in no need of expansiontiles for this type of tile.

Available in all AnyColor colors.

expKryssImage.jpg DSC_0024.jpg

Expansion Edge piece, System1

Bergo Expansion Edge piece is an accessory, which is used together with the Edge strips as practical and attractive ending of a row with Expansion strips.

Technical specification

Material:

Made of environmentally friendly recyclable PP-composite (polypropylene).
UV- and Colorstabilised for climat in Arizona.
FDA approved. No emissions. (No PVC).

 

Size: 75 x 52 mm. Height: 13,5 mm.

Article No. 41__

DSC_0054.JPG RD.jpg

Single tile Replacement Tool, System 1

Bergo Flooring has four fitting removal tools for different needs of the removal of the Bergo Floors; Disassembly Tool Professional, Disassembly Tool Consumer, Single Tile replacement Tool System1 and Single Tile Replcacement Tool System2. 

The Bergo Floor is easy to move. One can dismantle and move the floor quickly to the place one prefers with the use of our Singel Tile replacement Tool System2.

In case one tile is damaged one can change the individual tile by using Bergo Single Tile Replacement Tool.
Fits for System 1: Bergo Excellence, Bergo Multisport, Bergo Premium, Royal and Bergo Bergo Tennis.

Technical specification

Art. No. 15RT

SingelPlattupptagareImage.jpg SingelPlattupptagare.jpg

Disassembly tool Professional

Bergo Flooring has four fitting removal tools for different needs of the removal of the Bergo Floors; Disassembly Tool Professional, Disassembly Tool Consumer, Single Tile replacement Tool System1 and Single Tile Replcacement Tool System2. 

Bergo Disassembly Tool Professional is designed to be used for larger installation.

A shaft is included and this Tool is primarily to be used by those who have mobile applications and need a quick and easy dismantling of the Bergo Floor. 

For example, at Trade Shows, Events, Racing, etc.
Bergo Professional fits all Bergotiles, ie to both System1 and System2.

 

Technical specification

Art. No. 18RT 

vlcsnap-2016-11-29-13h52m30s062.png 18RT.jpg

Installation

Technical Specification

Material:

Made of environmentally friendly recyclable PP-composite (polypropylene).
UV- and Colorstabilised for climat in Arizona.
FDA approved. No emissions. (No PVC).

Size of tile:

301,6 x 301,6 mm.
Thickness of tile: 13,3 mm

Packaging:

Maxi pack: 5 m² / carton. 
Pallet: 180 m²

Pre-assembled sections 4 x 3 tiles = 12 tiles. 
(Size of preassembled section: approx. 1,2 x 0,9 m)
Pallet: 81,8 m²
 

Point load:

550 ton/m²= 5500 kg/dm² 150 kg/cm²

 

SYSTEM1

Download

Purchase Bergo

Purchase Bergo

Buy now!

Back to top